Contracting
with the iron horse
Traditionally, the construction industry uses relatively expensive and heavy equipment for many tasks. These machines are highly efficient but, particularly in the early stages of various development projects, smaller more mobile equipment can bring major benefits to the contractor
The iron horse in the building and construction industry
Pallet forks, Drawbars, Dumpers, Pallet holders, trailers, Fence rollers, etc, etc are some of the accessories already used by various contractors today and in cooperation more applications can be developed. Please contact us for a discussion on how your mobile tool carrier needs can be solved with an Iron Horse and accessories.
SHORT SET UP TIME
INCREASE YOUR REACH
The unique terrain characteristics allow you to access slightly more difficult areas with the same machine. Especially in wet areas, the benefits of belt drive are huge
DO MORE WITH ONE INVESTMENT
CREATE SOMETHING UNIQUE
Essence
- Engine alternative: Honda iGX800, 25 hp(18,6kW)
- Transmission: hydraulic, variable (hydrostat)
- Drive belt: internal drive with longer contact surface
- Working hydraulics: std 14,4 cm3, flow=45l/min, pressure=180+ bar
- Weight: 700 kg
- Load capacity: 1000 kg
- Dimensions: 194 x 114 x 117 cm (l x w x h)
- Remote controlled with radio control. Approximately 100 metres range.
- Traction: 1100 Kp
- Hydraulic radio-controlled winch Traction 800 Kg
Working hydraulics flow 45 l/min pressure 180 bar
Engine Engine Honda iGX800
Honda's most modern,
2-cylinder, fuel-injected
engine with 18kW of power
Drive Internal drive with Heavy Duty drive belt
Movable chassis
Unique, movable chassis
for optimum centre of gravity
against the drive belts
Accessory lift TF700 with float mode, third function and tilt function and lifts 700 Kg.
With universal attachment for Avant or Multione accessories
LED lighting
Winch Really strong hydraulic
winch with a pulling capacity of 800 Kg and 20m, 6mm wire,
throw block and safety hook
FLEX
- Engine four-stroke 9 Hp or 13 Hp
- With or without hydraulics
- Retractable control lever so you can ride on the machine
- Front/Back
- Handbrake
- Torque converter transmission
- Integrated motor winch
- Timber bunk
- Standard hand operated winch
- Chainsaw mount
- Storage box
- Differential lock
- Steel skid plate
- Heavy Duty rubber tracks with inside lugs
- Removable tooling point, mechanically or hydraulically
- Load capacity 1 ton
- Traction power 900 kp
- Speed 7 km/h
- Ground pressure 0,15 kg/cm3 at 500 Kg load
- Width 1080 mm
- Height 1120 mm (Transport mode)
- Length 1780 mm
- Weight 445 - 485 Kg
- Color Black or Green
- Option Hydraulics 21 litres/min Pressure 140 bar
* The machine in the picture is additionally equipped with hydraulics and load plate. The hydraulics have a flow rate of 21 litres/min and press 140 bar to operate the accessories and the removable accessory attachment.
Winch Really strong motor winch with a pulling capacity of 1 ton and 20m, 6mm wire,
throw block and safety hook
Driving Internal driving with Heavy Duty Band
Manual winch
Hydraulics 21 litres/min Pressure 140 Bar
Timber beam self-relieving
Accessory bracket can be moved to allow you to change
the centre of gravity of the load
with dumperSFLAK
The machine in the picture is equipped with a radio-controlled winch and dumper.
DUMPERSFLAK DF800
Art. No. 531 0147-38
Also supplied with spreader blade and load protection plate
over engine(not shown in picture)
- Weight 200 Kg
- Max load capacity 800 Kg
Hydraulic Radio Controlled Winch
Art. No. 531 0146-22
- Weight 30 Kg
- Speed 30 m/min
- Oil pressure 190 Bar
- Max traction 800 Kg
- Radio control 2 Channels
- Wire 6 mm
- Range Radio Approx. 50 m
- Wire length 25 m
Want to know more?
Contact us for more information. You can reach us via the form below or call us on +46(0)573-392 00.